TOP 5 HAZARD OF HAND TOOLS IN CONSTRUCTION AND ELECTRICAL WORKS

What are the Hazards of Hand Tools?

Employees should be trained in the proper use and handling of tools and equipment. The greatest hazards posed by hand tools result from misuse and improper maintenance.
Some examples include:

• Using a chisel as a screwdriver, the tip of the chisel may break and fly off, hitting the user or other employees.

• If a wooden handle on a tool is loose, splintered, or cracked, the head of the tool may fly off and strike the
user or other employees.

• If the jaws of a wrench are sprung, the wrench might slip.

• If impact tools such as chisels, wedges, or drift pins have mushroomed heads, the heads might shatter on impact, sending sharp fragments flying toward the user or other employees.

• When working in close proximity, employees should target saw blades, knives, or other tools away from away aisle areas and other employees. Knives and scissors must be sharp; dull tools can cause more hazards than sharp ones. Cracked saw blades must be removed from service.

Wrenches must not be used when jaws are sprung to the point that slippage occurs. Impact tools such as drift pins, wedges, and chisels must be kept free of mushroomed heads.

Iron or steel hand tools may produce sparks that can be an ignition source around flammable substances. Where this hazard exists, spark-resistant tools made of non-ferrous materials should be used where flammable gases, highly volatile liquids, and other explosive substances are stored or used.