A groundfault circuit interrupter (GFCI) is an electrical device which protects personnel by detecting potentially hazardous ground faults and immediately disconnecting power from the circuit. Any current over 8 mA is considered potentially dangerous depending on the path the current takes, the amount of time exposed to the shock, as well as the physical condition of the person receiving the shock.
GFCIs should be installed in such places as dwellings, hotels, motels, construction sites, marinas, receptacles near swimming pools and hot tubs, underwater lighting, fountains, and other areas in which a person may experience a ground fault.
A GFCI compares the amount of current in the ungrounded (hot) conductor with the amount of current in the neutral conductor. If the current in the neutral conductor becomes less than the current in the hot conductor, a ground fault condition exists.
The missing current is returned to the source by some path other than the intended path (fault current). A fault current as low as 4 mA to 6 mA activates the GFCI and interrupts the circuit.
Once activated, the fault condition is cleared and the GFCI manually resets before power may be restored to the circuit. GFCI protection may be installed at different locations within a circuit.
Direct-wired GFCI receptacles provide a ground fault protection at the point of installation. GFCI receptacles may also be connected to provide GFCI protection at all other receptacles installed downstream on the same circuit. GFCI CBs, when installed in a load center or panelboard, provide GFCI protection and conventional circuit overcurrent protection for all branch-circuit components connected to the CB.
Plug-in GFCls provide ground fault protection for devices plugged into them. Plug-in devices are generally utilized by personnel working with power tools in an area that does not include GFCI receptacles.
HOW GFCI WORKS? THE OPERATING PRINCIPLE OF GFCI
A GFCI compares the amount of current in the ungrounded (hot) conductor with the amount of current in the neutral conductor.
GFCI operation diagram is found below:
No comments:
Post a Comment